APM

HomeProductsDC Source System600V DC Source System600V High Voltage Power Supply APM Tech Design
Contact Supplier
Chris Liu

Mr. Chris Liu

Leave a message

600V High Voltage Power Supply APM Tech Design

Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.SPS600VDC12000W-2-13

BrandAPM

Place Of OriginChina

Input Voltage190~265VAC

Input Frequency47~63Hz

Input Power Max15KW

Power Factor≥0.98

Output Voltage Range0~600V

Output Current Range0~30A

Output Power Range0~12000W

Height13U

Warranty2 years

Supply Ability & Additional Information

Packagingcartons

Productivityother

TransportationAir

Place of OriginCHINA

Supply Abilityother

CertificateCE

HS Code8504401990

PortDHL

Payment TypeT/T

IncotermEXW

Packaging & Delivery
Selling Units:
Others
Package Type:
cartons
Picture Example:

Product Introduction: 

High volt Power Supply to meet your request!This 6U cabinet with wheels combined with max 3 units of single DC Power Supply can expand into max 1200V and 30A. Compared with sorensen power supply, it`s cost-effective with high performance. Active power factor correction is available for APM models. High accuracy programming and monitoring levels allow confidence in power supply measurements.it could be used as lab DC Source too .

There are more models,  40V DC Source System,75V DC Source System, 120V DC Source System,150V DC Source System,200V DC Source System, 800V DC Source System for your reference.


Application Area:

This series is applicable to multiple sectors such as electric, lighting and aviation sectors and it could be applied to enterprise's  production test as well.


Product Features:

● With accurate voltage and current measurement capability.
● 
Coded Knob, multifunction keyboard.
● 
Standard RS232/RS485/USB communication interfaces, LAN and GPIB is optional.
 Remote sensing line voltage drop compensation.
● Equips with LIST waveform editing function.
● 
Use the Standard Commands for Programmable Instrumentation(SCPI) communication protocol.
● Have obtained CE certification.


Technical Specification:

 ltem  MODEL  SYS600VDC12000W
 INPUT
1  Voltage  190~265VAC
2  Frequency  47~63Hz
3  Phase  3 Phase,4Wire+Groud/Y Connect
4  Max.Current  75A
5  Input Power Max  15kW
6  Power Factor
at 220VAC Input ,Full Load
 0.98 Min. Active PFC
7  Efficiency  >88%  Max @Full Load and Units=4kW Model
 OUTNPUT (Parallel Mode)
8  Output Voltage  0~600V
9  Output Current  0~30A
10  Output Power  12kW Max
11  Load Regulation  Voltage  240mV
12  Current  30mA
13  Line Regulation  Voltage  0.02%F.S.+30mV
14  Current  0.02%F.S.+15mA
15  Voltage Setting  Range  0~600V
16  Resolution  1mV
17  Accuracy  0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
 0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc
18  Current Setting  Range  0~30A
19  Resolution  1mA
20  Accuracy  0.1%+0.10%F.S
21  Ripple  Voltage  700mVp-p/80mVrms
22  Current  37.5mA(Full Range),15mA(TYP Value)
 MEASUREMENT (Parallel Mode)
23  Voltage Setting  Range  0~600V
24  Resolution  1mV
25  Accuracy

 0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
 0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc

26  Current Setting  Range  0~30A
27  Resolution  1mA
28  Accuracy  0.1%+0.10%F.S
 Extra Function
29  Remote Sense  Range  5V(DC), Max. Total power less than rated power
30  Comm. Respondence.  50ms
31  Graphic Display  VFD
32  Operation Key Feature  Soft key,Numberic key,Rotary Knob
33  Rack mount Handles  Yes
34  FAN  Temperature Control
35  Protection Circuits  OCP, OVP, OPP, OTP,FAN
36  Interface  USB, RS485, RS232(Standard); LAN,GPIB(Option)
 Remote Control Input/Output signal characteristics
37  Remote Input signal  Not Support
38  Remote output signal  Not Support
 Environmental
39  Operating Temperature  0°C~40°C
40  Storage  Temperature  -20°C~70°C
41  Altitude  2000m
42  Relative Humidity  10%~90%, non-condensing
43  Temperature Coefficient  100ppm/°C at Voltage, 300ppm/°C at Current
 Mechanical
44  Dimensions(W*H*D)  600.0*736.0*700.0 mm
45  Package Dimensions(W*H*D)  720.0*910.0*820.0 mm
46  Unit Net Weight  54kg+15kg*N(REF)
47  Accessories Weight  0.4kg
48  Shipping Weight  94kg+15kg*N(REF)
 Regulatory Compliance
49  CE Mark  Installation Overvltage Category II;Class II equipment;indoor use only.

*F.S. represents the maximum value of the output range.
*N stands for the number of installed power supply units,and N is greater than 1.


Product Categories : DC Source System > 600V DC Source System

Email to this supplier
  • *Subject:
  • *To:
    Mr. Chris Liu
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*

HomeProductsDC Source System600V DC Source System600V High Voltage Power Supply APM Tech Design
Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send