Product Introduction:
All of APM DC Power Supplies are designed to satisfy both automated test system or benchtop requirements or many other filed. This adjustable variable Bench Power Supply can auto cross-over for constant voltage (CV) and constant current (CC) operation. Additionally, a remote sensing terminal compensates for voltage drop across load leads, 4V max. best Lab Power Supply to meet the request.
Areas of Application:
● Automobile Sector: Used for automobile electronics product testing,and simulation of the voltage waveform of automobile under different conditions.
● Aerospace Sector: Used for aviation electronic products testing and Power Supply.
● Communication Sector: Used for the tests of communication power supply and electronic devices.
● Automatic Testing Sector: Can be integrated in automatic testing system to test electricity parameters, and to supply power to the products under testing.
● Scientific Research Sector:Used in scientific research units, colleges & universities,and certification institutions for laboratory testing and power supply.
● Household Field:Used for household products test.
● Medical Field:Used for medical device testing or it being integrated in medical equipment.
● LED Sector: Used for LED driver and LED product testing and burn-in test.
Product Features:
● Standrad RS232/RS485/USB interface.
● Use SCPI commands.
● Function of editing List waveform.
● Coded knobs, multifunctional keyboard.
● CE/UL/CSA/FCC certified.
● With accurate voltage and current measurement capability.
● Remote sensing to compensate for voltage drop in load leads.
● DVM independent measurement functions.
Product Advantages:
(1)High efficiency
APM programmable 80VDC source has an operating efficiency of up to 91%. In the circuit design, switch tube is using zero (0) voltage conductor and when the circuit is running, the damage inflicted on the device itself is reduced, and subsequently increase the overall efficiency while lowering the rate of temperature rise of the DC Source. Compare with other similar types of product in markets, APM Technologies' programmable DC source has an obvious advantage.
(2)Ultrafast Respond Time
The unique fast drop function makes the response of APM programmable 80VDC source much better than that of any other similar products available on the market.
| No load voltage rise time | ≤15ms | Full load voltage rise time | ≤15ms |
| No load voltage drop time | ≤450ms | Full load voltage drop time | ≤30ms |
(3)DVM measurement function
APM programmable DC source's built-in DVM independent measurement function can measure the value of output voltage at the output terminal, and display the value at VFD screen by switchover the front-panel buttons. The DC source can also be used as external equipment in laboratory testing to measure the voltage values.
(4)Master/Slave Control
In the master-slave control mode, up to 10 units of APM programmable DC source can be used in a series or parallel mode.
Master-slave control mode can realize the effect as "a hundred responses to a (single) call". Once the master-slave mode is settled, "SLAVE" will be locked in the main interface and exclusively controlled by "MASTER". When there is a "SLAVE" signaling of protection mode, all the DC sources will turn off and exit master-slave mode.
(5)Series Mode Functions
APM programmable 80 VDC source via its RS485 interface can be operated by using up to 31 units of the device ,thus makes it possible to simultaneously control all the DC sources connected on RS485 from PC.
Technical Specification:
| | Model | SPS80VDC1000W | SP80VDC2000W | SP80VDC3000W |
| 1 | Input Voltage Range | 190-265VAC |
| 2 | Input Frequency Range | 47-63Hz |
| 3 | Power Factor | >0.97 | >0.98 | >0.99 |
| 4 | Input Power | 1200VA(MAX) | 2400VA(MAX) | 3400VA(MAX) |
| 5 | Output Voltage Range | 0-80V |
| 6 | Output Current Range | 0-60A |
| 7 | Voltage Load Regulation | 15mV |
| 8 | Current Load Regulation | 60mA |
| 9 | Voltage Setting Accuracy | 0.05%+15mV |
| 10 | Current Setting Accuracy | 0.1%+60mA |
| 11 | Voltage Measurement Accuracy | 0.05%+15mV |
| 12 | Current Measurement Accuracy | 0.1%+60mA |
| 13 | Voltage Ripple[1] | 40mVp-p/6mVrms |
| 14 | Current Ripple[1] | 50mA (Full Range)
10mA (TYP value) |
| 15 | Voltage Temperature Coefficient[2] | 100ppm/℃ |
| 16 | Current Temperature Coefficient[2] | 150ppm/℃ |
| 17 | DVM Resolution | 0.1mV |
| 18 | DVM Accuracy | 0.05%+15mV |
| 19 | Remote Compensation | 4V MAX |
| 20 | Load Transient Response Time | ≤2ms |
| 21 | Command Response Time | 50ms |
| 22 | Efficiency(Full Load) | 89% |
| 23 | Protection Function | OVP/OCP/OTP/OPP/SCP/Fold back function |
| 24 | Weight | 13.2kg |
| 25 | Communication Modes | Standard:RS232/RS485/USB
Option:RS232/RS485/USB/LAN/GPIB |
| 26 | Operating Environment | Temperature 0~40℃,Relative Humidity 10%~90%(no condensation) |
[1] Test Condition: Voltage ripple, CV (Constant Voltage) mode-rated output voltage (Vp-p 20MHZ, Vrms 1.25MHZ); Current ripple: CC (Constant Current) mode (Arms 1.25MHZ)
Current ripple typical value parameter standard, test under condition that nominal voltage of the model is fully loaded, at the same time, when the full range output voltage of the model is full load output, the effective value of the current ripple is among the gamut reference range.
[2] Test Condition: Ambient temperature is among 0~40℃
Contact Now
