Product Introduction:
Programmable High Voltage DC Power Supply is supplied by APM. It`s single output 800V, 7.5A ,power ranging from 1000W to 4000W psu in a 2U package. Well suited for lots of sectors ,such as new energy, ,electrical motor, home appliance and other industrial to satisfy product testing, labs, quality inspection agencies and production lines etc. Many features can be found as below.
Except the 800V DC Power Supply,it could be also have lower voltage opition for 600V DC Power Supply,200V DC Power Supply,kindly check more with the regional sales.
Areas of Application:
● Household Field:Used for household products test.
● Scientific Research Sector:Used in scientific research units, colleges & universities,and certification institutions for laboratory testing and Power Supply.
● LED Sector: Used for LED driver and LED product testing and burn-in test.
● Aerospace Sector: Used for aviation electronic products testing and power supply.
● Automobile Sector: Used for automobile electronics product testing,and simulation of the voltage waveform of automobile under different conditions.
● Automatic Testing Sector: Can be integrated in automatic testing system to test electricity parameters, and to supply power to the products under testing.
● Medical Field:Used for medical device testing or it being integrated in medical equipment.
● Communication Sector: Used for the tests of communication power supply and electronic devices.
Product Features:
● Standrad RS232/RS485/USB interface.
● Remote sensing to compensate for voltage drop in load leads.
● DVM independent measurement functions.
● Function of editing List waveform.
● Coded knobs, multifunctional keyboard.
● CE/UL/CSA/FCC certified.
● With accurate voltage and current measurement capability.
● Use SCPI commands.
Product Advantages:
(1)High efficiency
APM programmable 800VDC source has an operating efficiency of up to 92%. In the circuit design, switch tube is using zero (0) voltage conductor and when the circuit is running, the damage inflicted on the device itself is reduced, and subsequently increase the overall efficiency while lowering the rate of temperature rise of the DC Source. Compare with other similar types of product in markets, APM Technologies' programmable DC source has an obvious advantage.
(2)Ultrafast Respond Time
The unique fast drop function makes the response of APM programmable 800VDC source much better than that of any other similar products available on the market.
| No load voltage rise time | ≤60ms | Full load voltage rise time | ≤60ms |
| No load voltage drop time | ≤800ms | Full load voltage drop time | ≤60ms |
(3)DVM measurement function
APM programmable DC source's built-in DVM independent measurement function can measure the value of output voltage at the output terminal, and display the value at VFD screen by switchover the front-panel buttons. The DC source can also be used as external equipment in laboratory testing to measure the voltage values.
(4)Master/Slave Control
In the master-slave control mode, can not be in series, can be 10 units in parallel.
Master-slave control mode can realize the effect as "a hundred responses to a (single) call". Once the master-slave mode is settled, "SLAVE" will be locked in the main interface and exclusively controlled by "MASTER". When there is a "SLAVE" signaling of protection mode, all the DC sources will turn off and exit master-slave mode.
(5)Series Mode Functions
This 800V series can support RS485 BUS communication interface, up to 31 units. It can simultaneously control all the DC sources connected via RS485 bus from one PC, which is easy for users to monitor operation.
Technical Specification:
| Model
| SPS800VDC1000W
| SP800VDC2000W
| SP800VDC3000W
| SP800VDC4000W
|
| 1 | Input Voltage Range
| 90-265VAC
| 190-265VAC
| 190-265VAC
| 190-265VAC
|
| 2 | Input Frequency Range
| 47-63Hz
|
| 3 | Power Factor
| >0.98
|
| 4 | Input Power
| 1300VA(MAX)
| 2400VA(MAX)
| 3400VA(MAX)
| 4500VA(MAX)
|
| 5 | Output Voltage Range
| 0-800V
|
| 6 | Output Current Range
| 0-7.5A
|
| 7 | Voltage Load Regulation
| 200mV
|
| 8 | Current Load Regulation
| 20mA
|
| 9 | Voltage Setting Accuracy
| 0.05%+200mV
|
| 10 | Current Setting Accuracy
| 0.1%+7.5mA
|
| 11 | Voltage Measurement Accuracy
| 0.05%+200mV
|
| 12 | Current Measurement Accuracy
| 0.1%+7.5mA
|
| 13 | Voltage Ripple[1]
| 800mVp-p/200mVrms
|
| 14 | Current Ripple[1]
| 25mA (Full Range)
10mA (TYP value)
|
| 15 | Voltage Temperature Coefficient[2]
| 100ppm/℃
|
| 16 | Current Temperature Coefficient[2]
| 150ppm/℃
|
| 17 | DVM Resolution
| 12mV
|
| 18 | DVM Accuracy
| 0.05%+200mV
|
| 19 | Remote Compensation
| 5V MAX
|
| 20 | Load Transient Response Time
| ≤3ms
|
| 21 | Command Response Time
| 50ms
|
| 22 | Efficiency(Full Load)
| 85%
| 91%
| 91%
| 92%
|
| 23 | Protection Function
| OVP/OCP/OTP/OPP/SCP/Fold back function
|
| 24 | Weight
| 14.7kg
|
| 25 | Communication Modes
| Standard:RS232/RS485/USB
Option:RS232/RS485/USB/LAN/GPIB
|
| 26 | Operating Environment
| Temperature 0~40℃,Relative Humidity 10%~90%(no condensation)
|
[1] Test Condition: Voltage ripple, CV (Constant Voltage) mode-rated output voltage (Vp-p 20MHZ, Vrms 1.25MHZ); Current ripple: CC (Constant Current) mode (Arms 1.25MHZ) Current ripple typical value parameter standard, test under condition that nominal voltage of the model is fully loaded, at the same time, when the full range output voltage of the model is full load output, the effective value of the current ripple is among the gamut reference range.
[2] Test Condition: Ambient temperature is among 0~40℃
Contact Now
